Apple Cider Vinegar
4.6
(9)
You can make your own delicious apple cider vinegar, whether you start from your own pressed apple juice, store-bought apple juice, or already-fermented hard cider. If you’re starting with hard cider, skip to step 5. If you’re making ACV with fresh-pressed juice, you can skip the yeast altogether and do a wild ferment. If you’re starting out with pasteurized juice, you will need yeast. This recipe uses commercial winemaker's yeast, but you can choose to use a wild yeast starter.
Apple juice falls beautifully in the specific gravity range for the perfect alcohol to create a good acidic vinegar. I have never had to adjust with any extra sugar so there isn’t a need to measure specific gravity or Brix for successful vinegar, but if you keep a vinegar log and have the tools, you may want to keep track of this. Apples are also naturally acidic fruit. This lower pH means you won’t have to bring the pH down with lemon juice to help get a strong fermentation without surface yeast. This, and most of the recipes in this book don’t strictly need a vinegar starter; vinegar will happen on its own. In my years of making vinegar, though, I’ve found that the success rate is so much higher with the inoculation, there’s no reason not to use a starter unless you simply don’t have access to raw vinegar.
Because this cider is destined to become vinegar, this recipe uses an open container that gives the cider lots of air contact. If you decide you want to drink a bit of the cider and make vinegar with the rest, it’s important to use a narrow-mouthed bottle fitted with an air- lock during the first fermentation. This recipe is for a gallon, simply because gallon containers are easy to procure. You should feel free to increase or decrease it, as needed. Many ACV recipes online call for cutting apples into chunks and adding sugar and water. While you will get a similar flavor, you will not get the same product. If you want true apple cider vinegar with all its nutrients, you need to start with real apple juice.
Recipe information
Yield
Makes 1 gallon
Ingredients
Preparation
Step 1
Fill a sanitized 1-gallon jar with juice, leaving about 2 inches of headspace.
Step 2
Add the hydrated yeast or the wild yeast starter to the jar. Alternatively, if wild fermenting, skip to step 4.
Step 3
Cover the jar with a piece of unbleached cotton (butter muslin or tightly woven cheesecloth), or a basket-style coffee filter. Secure with a string, a rubber band, or a threaded metal canning band. This is to keep out fruit flies.
Step 4
Place in an environment where the temperature is between 55° and 65°F. Wild yeasts seem to do better at this temperature range. Unlike some active commercial yeasts, wild yeasts are typically slow to start, so don’t expect to see bubbles for a couple of days or more.
Step 5
At 7 to 10 days, add the raw vinegar. Replace the cover on the jar. Store on your counter or in another spot that is 75° to 86°F.
Step 6
Check the vinegar in a month, when you should have nice acidity. However, it may take an additional month or two to fully develop, especially if your environment is cooler.
Step 7
Bottle the finished vinegar, saving the mother for another batch or sharing with a friend. Use immediately, or age to allow it to mellow and develop flavors.
Recipe notes
Back to topSee Related Recipes and Cooking Tips
How Americans Became Obsessed With Drinking Apple Cider Vinegar
The story of how health-conscious thrill-seekers started chugging vinegar, from Johnny Appleseed to Katy Perry.
